blabla / Decibel meter

A relative sound level meter for your microphone

This decibel meter shows your microphone input as a relative level. It is not calibrated and not a certified instrument.

The microphone is not calibrated: values are relative, not real sound pressure (dB SPL).

Current level

-inf dBFS

Relative scale: 0 / 100

Average
-
Peak
-
Minimum
-

Level over time

Everything runs in your browser. Audio is never uploaded. Privacy

Use it to compare: is the room quieter with the window shut, which hour is the loudest. Do not use it as evidence in a noise dispute. You get the current level in dBFS, the average, peak and minimum, and a graph over time.

How to use the decibel meter

Measuring takes four steps: start, place the device, read the numbers, compare.

  1. Press Start and allow the microphone. Pick the right input if you have several.
  2. Leave the device where you want to measure and wait 5 to 10 seconds.
  3. Read Current level and the Relative scale from 0 to 100, labelled Quiet, Moderate, Loud or Very loud.
  4. Compare Average, Peak, Minimum and the graph. Reset clears the statistics.

Auto gain, noise suppression and echo cancellation are switched off, so the reading follows the real input. Measure with the same device in the same spot for a fair comparison, and note the time and place of each run, because numbers without context say little a week later.

Why the values are relative

A browser reports dBFS, the level against digital full scale, not dB SPL, the real sound pressure.

dBFS values are negative and 0 is the maximum. Real loudness depends on microphone sensitivity, system gain and placement, so -30 dBFS means different noise on different devices. A calibrated meter has a measurement microphone, A and C weighting and a calibration certificate. A phone or laptop microphone has none of these.

SoundReference, dB SPL
Whisperabout 30
Conversation60-70
Concert100-110
Pain threshold120-130

This table is in dB SPL and your reading is in dBFS, so do not compare them directly. A reading of -40 dBFS does not mean 40 dB.

Audio stays on your device

The meter turns microphone input into a level in your browser and records nothing.

The browser asks permission first. The page discards the sound right after measuring it, and only numbers and the graph remain in the tab. Stop or close the tab and the microphone turns off.

FAQ

Is this decibel meter accurate?

Only for comparing on one device. The microphone is not calibrated, so absolute dB is unknown.

Can I use it as evidence of noise?

No. It has no calibration or certification, so it cannot replace a certified meter.

Why do readings differ between devices?

Microphone sensitivity and gain differ per device. Compare readings only on the same device.

More tools

Check your voice level with the mic test or record it with the online voice recorder. See all tools on the blabla home page.